China Custom GJP Cross Spider Automotive Universal Joint Bearing GUT12 for Japanese Vehicles Manufacturers, Suppliers, Factory

Description- GJP Universal Joint Bearing GUT-12 For Toyota

GJP Bar Code Number: 6935329839472

GJP universal joint is a mechanism that realizes variable-angle power transmission. It is used to change the position of the transmission axis. It is the "joint" part of the universal transmission of the automobile drive system. The combination of a universal joint and a transmission shaft is called a universal joint transmission. In front-engine rear-wheel-drive vehicles, a universal joint transmission is installed between the transmission output shaft and the drive axle main reducer input shaft; while front-engine front-wheel-drive vehicles omit the drive shaft, the universal joint is installed Between the front axle axle and the wheels, which both drive and steer.

It can be divided into unequal velocity joints, quasi-constant velocity joints, constant velocity joints.

The structure and function of the universal joint is similar to the joints on the human limbs, which allows the included angle between the connected parts to change within a certain range. In order to meet the angle change caused by power transmission, adaptive steering, and up-and-down jumps that occur when the car is running, the drive axles of front-drive cars are usually connected with universal joints between the axle and the axle. However, due to the limitation of the axial size, the required deflection angle is relatively large. A single universal joint cannot make the instantaneous angular velocity of the output shaft and the shaft into the shaft equal, which easily causes vibration, exacerbates the damage of components, and generates a lot of noise. Therefore, various constant velocity universal joints are widely used. In front-drive cars, two constant velocity joints are used for each semi-axle, the joints near the transaxle are the inner joints of the semi-axle, and the ones near the axle are the outer joints of the semi-axle. In rear-drive cars, the engine, clutch, and transmission are mounted on the frame as a whole, and the drive axle is connected to the frame through an elastic suspension. There is a distance between the two, which needs to be connected. The unevenness of the road surface during the running of the car, the load change, or the position difference between the two assembly installations will cause the angle and distance between the transmission output shaft and the drive axle main reducer input shaft to change. The universal joint transmission uses double universal joints, that is, there is a universal joint at each end of the transmission shaft, and its role is to make the included angle of the two ends of the transmission shaft equal, so that the instantaneous angular velocity of the output shaft and the input shaft are always equal.

Universal Joint

HINO
Part No.	D mm	L mm	Spicer	Precision	GMB	GKN	Type
GUH03	22	65	44330-538-004	HD2265C	UJ810	240	A
GUH60	40.2	115	37401-1172				A
GUH61	47	124	9-953-3401-01	H47124	ZUJ511	2100	H
GUH62	47	138	3-302-3403-01	H47138	UJ512	2600	H
GUH63	35.01	99	3-331-3403-01	H3599	UJ514	1260	A
GUH64	50	159	3-302-3403-06	H50159	UJ513	3150	A
GUH65	36	110.3	3-445-3034-04	H36110	UJ515	1250	A
GUH75	58.03	175	37401-1180				H
GUH66	23.82	65.96	6042-8409-00	H2466	UJ516	295	A
GUH67			3301-3403-01			3100	G
GUH68	47	144	04037-4008		UJ517	2300	H
GUH69	20	58	45220-1060			200	A
GUH70	47	138	37401-1061			2200	H
GUH71	47	144	37401-1010			2300	H
GUH72	47	144	37401-1080			2300	H
GUH73	50	165	37401-1021		UJ518		H
GUH74	36	115.6	37401-1100			1300	A
GUH76	40	116.1
ISUZU
GUIS51	23.82	61.3	9-37300-017	12461	UJ313	285		A
GUIS52	29	50	9-37300-065	12976	UJ314	500		B
GUIS54	36	97	9-37300-055	136101	UJ311	1260		E
GUIS55	42	125	9-37300-150		UJ320	1520		H
GUIS56	23.82	61.2	9-37300-609			285		A
GUIS57	48	145	9-37300-163	148149	UJ321	2500		H
GUIS58	36	97	9-37300-112	136101A	UJ312	1290		E
GUIS59	20.5	56.6	44135-060		UJ	315		A
GUIS60	49.2	148.38	9-37300-139	070004AR-1		3100		G
GUIS61	23.82	61.3	9-37300-031			285		A
GUIS62	35	103.92	1373000130	1351041		1100		A
GUIS63	22.06	62.5	94207232-1			230		A
GUIS64	40	115	1-37300-047-0					A
GUIS65	45.98	136	1-37300-004-0					A
GUIS66	33	93	5-37300-032-0					A
GUIS67	56	173.9	1-37300-049-0			3850		G
GUIS68	50	155	1-37300-082-0					H
KOMATSU
GUKO-29	140.45	33.33
MITSUBISHI
GUM-71	44	129
GUM-75	31.75	102
GUM-80	46	142
GUM-81	25	63
GUM-85	22.06	64.5
GUM-87	30	78.2	MB000119		UJ627	560		A
GUM-88	25	76.5	MB000776(0008)			405		A
GUM-90	46	148	148001-06001	M46148	UJ629			H
GUM-91	25	76.7	MB000948	M2576				A
GUM-92	20.02	55	MB000697					A
GUM-93	30	55.1	MB000267	S32102A				B
GUM-95	22	37.3						B
GUM-97	44	131
MAZDA
Part No.	D mm	L mm	Spicer	Precision	GMB	GKN		Type
GUMZ-1/5	25	63.8	0136-25-060	TM2564A	UJ410	275		A
GUMZ-2	20.02	55	0180-25-060	TM2055	UJ412	180		A
GUMZ-3/4	32	57	0164-25-060	TM3293	UJ414	500		B
GUMZ-6	28	56	0706-89-251	TM2880	UJ415			B
GUMZ-7	25	41.2	0259-25-060	TM2564B	UJ413	280		B
GUMZ-8	37	67	0727-25-060	TM37104	UJ416	1230		B
GUMZ-9	26.5	48	1757-89-251		UJ417	420		B
GUMZ-10	22.5	35	3919-39-251		UJ418	240		B
GUMZ-11	22.06	59.6						A
GUMZ-12	24.06	71.6						A
NISSAN
GUN26	23.82	61.3						B
GUN27	25	44
GUN28	20.01	38
GUN29	28	56.1
GUN30	30.18	92.05
GUN31	32	107	37125-50001	N32111	UJ116	1010		H
GUN32	35.5	119.2	37125-58026	N36119	UJ117	1320		A
GUN33	43	128	37125-99901	ND43128	UJ119	1400		A
GUN34	25	52	37125-76025	N2580	UJ113	350		B
GUN36	25	77.6	37125-4101	NP2578	UJ120	500		A
GUN38	26	45.6	37125-68200		UJ121	410		B
GUN41	43	135.5	37125-90128	ND43142	UJ125	2350		H
GUN42	40.04	123.8	37125-99900	ND40124	UJ118	1555		H
GUN43	55.01	163.8	37125-90027	ND43128B	UJ126	3950		H
GUN44	20.5	56.5	37125-99000		UJ124	195		A
GUN45	20.07	52.4	37125-H8500			200		A
GUN46	27	45.9	37126-01G25			430		B
GUN47	27	81.75	37125-25025					A
GUN48	27	81.75	37125-7F025					A

SUZUKI
Part No.	D mm	L mm	Spicer	Precision	GMB	GKN		Type
GUS1	25	40.2	27200-58833	SZ2564TR	UJ700	275
GUS2	20.02	35	27100-67000					A
GUS3			27100-63850(F)
GUS4			27100-302
GUS5			27100-62860
GUS6	20.1	59.8	27200-60511			200		A
GUS7	25	63.8	27200-83010			270		A
TOYOTA
Part No.	D mm	L mm	Spicer	Precision	GMB	GKN		Type
GUT-11	20	57	04371-10011	T2057	UJ212	180		A
GUT-12	26	5306	04371-30011	T2680C	UJ210	410		B
GUT-13	26	46.8	04371-20010	T2667	UJ211	380		B
GUT-14	28.5	77.9	04371-60010	T2978	UJ214	515		A
GUT-15	34	107	04371-55011	T34107	UJ216	960		A
GUT-16	40	118	04371-55020	T40119	UJ215	1800		A
GUT-17	29	49	04371-30020	T2977	UJ230	515		B
GUT-19	20	57	04371-10010	T2057	UJ222	180		A
GUT-20	32	61	04371-36021	T32921	UJ234	670		B
GUT-21	29	49	04371-35020		UJ230	515		B
GUT-22	40	118	04371-55021			1850		A
GUT-23	29	49	04371-35030					B
GUT-24	22.06	57.5				230		A

Technical Data

Item No.: GUT12

Forging Material: 20Cr

Type: Automotive Parts

Quality Control: Under ISO: 9001: 2008 Certificate

Package: 1*1 poly bag+1*1box box+ outer carton+Composite Wooden Pallet

Hot Tags: GJP cross spider automotive universal joint bearing gut12 for japanese vehicles, China, manufacturers, suppliers, factory, custom, UCP205 Bearing, GUT12 Universal Joint Bearing, SAFT205-16 Bearing, D41 Bearing, UCP206-17, UCP212-37 Bearing

GJP Cross Spider Automotive Universal Joint Bearing GUT12 for Japanese Vehicles

Product Details

Inquiry

You Might Also Like