Description-1 3/4”Bore Pillow Block Bearing Unit UCP209-28
GJP Bar Code Number: 6935329800656
GJP 1 3/4" Bearing Unit UCP209-28 For Cold Stamping Equipment, Which has grease fitting and Cap on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used.
Interchange
GJP: UCP209-28
AMI: UCP209-28
IPTCI: UCP209-28
NSK: UCP209-28
NTN: UCP209-112D1
Peer: FHSP209-28G
Fafnir: RASC-1 3/4"
Fafnir: YAS-1 3/4"
RHP: NP-1 3/4"
SKF: SY 1 3/4" TF
Sealmaster: NP-28
Basic Dimensions | ||||||||
Bore Size | Center Shaft to Base Size | Housing Length | Center Bolt to Bolt Size | Housing Width | Housing Bolt Length | Housing Bolt Width | Housing Height | Bolt Size |
1 3/4" | 54MM | 190MM | 146MM | 54MM | 21MM | 17MM | 106MM | 1/2 |
Technical Data for GJP UCP209-28
Housing No.: P209
Bearing Insert No.: UC209-28
Material For Bearing Insert: 100% Chrome Steel Gcr15(AISI 52100)
Grade For Steel Ball: G10 Grade Chrome Steel Ball.
Materia of Bearing Cage: #10 Steel
Stopping Pin Material on OD of OR: Chrome Steel Gcr15
Sealing Type: F Seal, L3 Seal And Normal NBR Seal are available for customers’selection.
Set Screw Material: 35CrMo
Grease: 20% to 50% Mobil Grease
Set Screw Surrounding Hardness: HRC49 to HRC 50
Bearing Race and Steel Ball Hardness: HRC59 to HRC62
Bearing Housing Material: HT200 Grey Cast Iron
Housing Color: Green, Blue, Grey, Black Color available.
Whole Unit Assembly Type: J7 Tight Fitting
Housing Weight: 1.40KGS
Quality Control: Under ISO: 9001: 2008 Certificate
Package: 1*1 Single GJP poly bag+1*1 Single GJP color box+1*1 GJP outer carton
FAQ
Recently, our country’s currency is devaluing too much compared to US dollar currency, nearly 30% lower, could you please lower down the prices some for us?
Yes, it’s the worldwide situation for many countries, but the point is that our currency did not devalue, if we lower down the prices, it means that we need to share out our profits to you, but the fact is that for bearings products, the prices is very competitive, we could only add small bargin profits, we could help you for one time or two times without making profits, but I suggest that in your future order, if you confirm the order with us or any other of your vendors, you could firstly buy the US dollars in the their cheap prices and save it in your account, so that you could fix the exchange rate and don’t get loss.
