1 3/8'' Pillow Block Ball Bearing Unit UCP207-22

Description-1 3/8”Inch Bore Pillow Block Ball Bearing UCP207-22

GJP Bar Code Number: 6935329802186

GJP 1 3/8" Pillow Block Ball Bearing Unit UCP207-22 with solid base type housing. Which has grease fitting on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used.

Interchange

GJP: UCP207-22

AMI: UCP207-22

IPTCI: UCP207-22

NSK: UCP207-22

NTN: UCP207-106D1

Peer: FHSP207-22G

Fafnir: RASC-1 3/8"

Fafnir: YAS-1 3/8"

RHP: NP-1 3/8"

SKF: SY 1 3/8" TF

Sealmaster: NP-22

Technical Data for GJP UCP207-22

Housing No.: P207

Bearing Insert No.: UC207-22

Material For Bearing Insert: 100% Chrome Steel Gcr15(AISI 52100)

Grade For Steel Ball: G10 Grade Chrome Steel Ball.

Materia of Bearing Cage: #10 Steel

Stopping Pin Material on OD of OR: Chrome Steel Gcr15

Sealing Type: F Seal, L3 Seal And Normal NBR Seal are available for customers’selection.

Set Screw Material: 35CrMo

Grease: 20% to 50% Mobil Grease

Set Screw Surrounding Hardness: HRC49 to HRC 50

Bearing Race and Steel Ball Hardness: HRC59 to HRC62

Bearing Housing Material: HT200 Grey Cast Iron

Housing Color: Green, Blue, Grey, Black Color available.

Whole Unit Assembly Type: J7 Tight Fitting

Housing Weight: 1.00KGS

Quality Control: Under ISO: 9001: 2008 Certificate

Package: 1*1 Single GJP poly bag+1*1 Single GJP color box+1*1 GJP outer carton

FAQ

Since Year 2017, Chinese government takes measure about the pollution, is there any effect on your factory? How do you think of this pollution remediation? Is it good for you and your country?

Yes, as you known, we’re the producer for the mounted unit bearings and plummer block housing, which need us to do the casting, before year 2017, in order to save cost and in order to have bigger production outcome, we use the Cupola Furnace to do the casting and make the steel melt into molten iron at more thousands’ degree centrage, but it would produce a lot of pollution by using cupola, as it use the coal for burning, since the end of year 2017, we’re guided to use the electric stoves which use the electricity for casting, now we have four stoves which could satisfy our present ordering requirements, and sure, it’s a kind of paint for a short time for us to upgrade our facilities, but for a long term, it’s good for all of our country.