Description-13/16” Inch Bore UCP205-13 Pillow Block Bearing
GJP Bar Code Number: 6935329802056
GJP 13/16" Inch Pillow Block Bearing UCP205-13 with solid base housing and radial insert ball bearing with grub set screw to lock to the shaft. Which is smaller size and has grease zerk on 45 degree angle, and the insert bearing has a wide inner ring with spherical outer diameter, and there are four star seal and with ball point set screw, bearing insert and housing are normally assemblied with J7 tight fitting.
SKF: SY 13/16" TF
Center Shaft to Base Size
Center Bolt to Bolt Size
Housing Bolt Length
Housing Bolt Width
Technical Data for GJP UCP205-13
Housing No.: P205
Bearing Insert No.: UC205-13
Material For Bearing Insert: 100% Chrome Steel Gcr15(AISI 52100)
Grade For Steel Ball: G10 Grade Chrome Steel Ball.
Materia of Bearing Cage: #10 Steel
Stopping Pin Material on OD of OR: Chrome Steel Gcr15
Sealing Type: F Seal, L3 Seal And Normal NBR Seal are available for customers’selection.
Set Screw Material: 35CrMo
Grease: 20% to 50% Mobil Grease
Set Screw Surrounding Hardness: HRC49 to HRC 50
Bearing Race and Steel Ball Hardness: HRC59 to HRC62
Bearing Housing Material: HT200 Grey Cast Iron
Housing Color: Green, Blue, Grey, Black Color available.
Whole Unit Assembly Type: J7 Tight Fitting
Housing Weight: 0.6KGS
Quality Control: Under ISO: 9001: 2008 Certificate
Package: 1*1 Single GJP poly bag+1*1 Single GJP color box+1*1 GJP outer carton
GJP has High quality control on raw material choice,We mainly choose raw material from big steel factory, such as TPCO, BAO STEEL, SHA STEEL, which are best and largest raw material manufacturer in China, which GJP also analyse the material when we receive the raw material and normally GJP request the material suppliers to provide the according material testing report for every different lots.
Your factory is producing the Pillow Block Housing only? I mean the housing, or could you produce Insert Ball Bearing also?
Wow! It’s a very professional question, for your information, our factory could produce both the outer housing, but also the inner ball bearing insert, we have two factories, which locates by each other, which could make sure our company control from the beginning to the end, but for the bearing insert, we mainly produce UC series, HC Series, SA Series, SB Series, UK series (from size 201 to 218), for UCX Series, if our customers need, they could send us the bearing insert by themselves or we could help them purchase from other of our partners, of course, for the Eccentric Locking Collars, Adapater and Sleeves, set Screw,we need to buy from outside of our factory.