Description-35MM Bore Pillow Block Bearing UCP207
GJP Bar Code Number: 6935329800625
GJP 35mm Bore Triple Seal Pillow Block Bearing UCP207 For Chuck, Which has grease fitting and Cap on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used, this type of housed unit is available in a wide variety of sizes and configurations to meet the requirements of demanding applications. Popular part numbers are in stock for immediate availability, imperial units are also available in shaft diameters ranging from 12mm to 90mm, different sealing construction could be decided by the exact application and customers’ demanding.
SKF: SY 35 TF
Center Shaft to Base Size
Center Bolt to Bolt Size
Housing Bolt Length
Housing Bolt Width
Technical Data for GJP UCP207
Housing No.: P207
Bearing Insert No.: UC207G
Material For Bearing Insert: 100% Chrome Steel Gcr15(AISI 52100)
Grade For Steel Ball: G10 Grade Chrome Steel Ball.
Materia of Bearing Cage: #10 Steel
Stopping Pin Material on OD of OR: Chrome Steel Gcr15
Sealing Type: F Seal, L3 Seal And Normal NBR Seal are available for customers’selection.
Set Screw Material: 35CrMo
Grease: 20% to 50% Mobil Grease
Set Screw Surrounding Hardness: HRC49 to HRC 50
Bearing Race and Steel Ball Hardness: HRC59 to HRC62
Bearing Housing Material: HT200 Grey Cast Iron
Housing Color: Green, Blue, Grey, Black Color available.
Whole Unit Assembly Type: J7 Tight Fitting
Housing Weight: 1.00KGS
Quality Control: Under ISO: 9001: 2008 Certificate
Package: 1*1 Single GJP poly bag+1*1 Single GJP color box+1*1 GJP outer carton
How many production lines in GJP factory? For bearing products, do you turning, heatment, and grinding all by yourself in GJP factory?
Now we have 7 production lines for our pillow block factory, we would turn the outer diameter of housing, turn the housing base, turn the grease groove, drilling the holes, drilling the grease hole at the same time with 7 production lines, so that we could make sure the quick production, and for the bearings, we could do the turning and grinding by ourself, for the heat treatment, because other people have better equipment for annealing, at present, we send out our turning products to outside professional factory for heat treatment, then we get back for doing the rough grinding and super-finished grinding by ourself.