Description-40MM Bore Pillow Block Bearing Unit UCP208
GJP Bar Code Number: 6935329800649
GJP 40mm Bore Dia. Pillow Block Bearing UCP208-40mm For Textile Machine, Which has grease fitting and Cap on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used, when heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movements. Mechanical stops or shear bars with strength sufficient to support the load should be added.Never weld the pillow block housing or bearing to secure it to the shaft or base.
GJP: UCP208 40MM
SKF: SY 40 TF
Center Shaft to Base Size
Center Bolt to Bolt Size
Housing Bolt Length
Housing Bolt Width
Technical Data for GJP UCP208 40MM
Housing No.: P208
Bearing Insert No.: UC208
Material For Bearing Insert: 100% Chrome Steel Gcr15(AISI 52100)
Grade For Steel Ball: G10 Grade Chrome Steel Ball.
Materia of Bearing Cage: #10 Steel
Stopping Pin Material on OD of OR: Chrome Steel Gcr15
Sealing Type: F Seal, L3 Seal And Normal NBR Seal are available for customers’selection.
Set Screw Material: 35CrMo
Grease: 20% to 50% Mobil Grease
Set Screw Surrounding Hardness: HRC49 to HRC 50
Bearing Race and Steel Ball Hardness: HRC59 to HRC62
Bearing Housing Material: HT200 Grey Cast Iron
Housing Color: Green, Blue, Grey, Black Color available.
Whole Unit Assembly Type: J7 Tight Fitting
Housing Weight: 1.30KGS
Quality Control: Under ISO: 9001: 2008 Certificate
Package: 1*1 Single GJP poly bag+1*1 Single GJP color box+1*1 GJP outer carton
We used to buy bearings from other suppliers, and we request them to send the samples firstly, and their samples are qualified, but for bulk cargo, there are some of the problems for part of quantity? Will this happen in your company also?
I guess you must buy the bearings from small factory, which they are not reliable and their quality level is not stable, but for us, there is no problem for this, normally if you need 10pcs of samples, we would produce around 12 pieces and keep another 2 pieces copied samples in our warehouse, and do the careful record on the samples we delivered to our buyers, if samples are approved, we would strictly produce according to our record and samples, which is a careful guide and also it’s a rule and regulation for ISO control.