Bearing with Housing Unit UCP Ucf Ucfc UCT Ucpa

Bearing with Housing Unit UCP Ucf Ucfc UCT Ucpa

GJP 1 1/16" Shaft Size Pillow Block Bearing UCP206-17 with solid base housing. Which has grease zerk on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used.

Product Details

We strive for Thrust Bearing, UCP205 Bearing, UCP208-24 Bearing. Looking forward to the future, our company will seize the opportunity to increase independent product innovation, accelerate domestic and international market share and realize scale economy and leapfrog development. We uphold high standards and continue to carry out management reforms, pursuing simultaneous improvement of efficiency and value. Thank you for taking time to browse our website and we would welcome any suggestions you may have that can help us to improve our site. We continue to improve our science and technology innovation system and enhance our product and technology development and production capacity.

Description-1 1/16”Bore UCP206-17 Pillow Block Bearing

GJP Bar Code Number: 6935329802124

GJP 1 1/16" Shaft Size Pillow Block Bearing UCP206-17 with solid base housing. Which has grease zerk on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used.


Interchange

GJP: UCP206-17

AMI: UCP206-17

IPTCI: UCP206-17

NSK: UCP206-17

Peer: FHSP206-17G

Fafnir: RASC-1 1/16”

Fafnir: YAS-1 1/16”

RHP: NP-1 1/16”

SKF: SY 1 1/16”TF

Sealmaster: NP-17


UCP206-17


Basic Dimensions

Bore Size

Center Shaft to Base Size

Housing Length

Center Bolt to Bolt Size

Housing Width

Housing Bolt Length

Housing Bolt Width

Housing Height

Bolt Size

1 1/16"

42.9MM

165MM

121MM

48MM

21MM

17MM

83MM

1/2"


Technical Data for GJP UCP206-17

Housing No.: P206

Bearing Insert No.: UC206-17

Material For Bearing Insert: 100% Chrome Steel Gcr15(AISI 52100)

Grade For Steel Ball: G10 Grade Chrome Steel Ball.

Materia of Bearing Cage: #10 Steel

Stopping Pin Material on OD of OR: Chrome Steel Gcr15

Sealing Type: F Seal, L3 Seal And Normal NBR Seal are available for customers’selection.

Set Screw Material: 35CrMo

Grease: 20% to 50% Mobil Grease

Set Screw Surrounding Hardness: HRC49 to HRC 50

Bearing Race and Steel Ball Hardness: HRC59 to HRC62

Bearing Housing Material: HT200 Grey Cast Iron

Housing Color: Green, Blue, Grey, Black Color available.

Whole Unit Assembly Type: J7 Tight Fitting

Housing Weight: 0.97KGS

Quality Control: Under ISO: 9001: 2008 Certificate

Package: 1*1 Single GJP poly bag+1*1 Single GJP color box+1*1 GJP outer carton


UCP206-17 Pillow Block Bearing(001)


GJP advantage:

GJP is excellent in processing the gray iron material products, especially for the thin-wall casting, GJP could cast very good surface of thin-wall castings, which is normally not easy to control for sand castings, but we made suitable technology and are able to guarantee smooth no-defect surface and could have a less NG products after machining.


FAQ

Which is the nearest loading port from your factory’s location?

Normally our loading port is Xiamen Port, which is nearby our factory, but if customer wanna us to ship from Ning Port or Shanghai Port to combine with other of their cargo, we would ship our consignments to the assigned port you need, and for the Chinese domestic transportation charge cost by shipping from Xiamen to other ports, we’ll evaluate, if the cost is affordable by us, then we would not charge customers’ additional fee, but if it’s too costy, then we would need our buyers to afford part of the fee, as you know, our Cast Iron Bearing units are always very heavy, and it would take more cost during transportation.


Over the years, with the experience of solving practical production applications for customers, we have absorbed the essence of similar products at home and abroad to further improve the design and performance of our Bearing with Housing Unit UCP Ucf Ucfc UCT Ucpa. The competitive society makes us breathless sometimes. The life full of bitterness and bitterness makes us confused sometimes. My team makes every product with sincerity. After years of technology accumulation, our company has achieved a leading advantage in product technology at home and abroad.
Hot Tags: 1 1/16'' shaft size pillow block bearing ucp206-17, China, manufacturers, suppliers, factory, custom, UCP207-23, GUT12 Universal Joint, Relube Rod End Bearing, UCP215-48, Ultra High Temperature Bearing, UCP209 Pillow Block Bearing

Inquiry

You Might Also Like