High Quality Customizable Fishing Gears Ball Bearing 639 Zz/2RS

High Quality Customizable Fishing Gears Ball Bearing 639 Zz/2RS

GJP Dental Bearing S418MCKHH is mainly for high-speed hand piece, which could rotate at the speed of 400,000RPM, replaceable with the dental hand pieces produced in Japan, Germany and UK etc., at the normal working condition, the clinical service life is no less than six months

Product Details

We listen carefully to our customers' suggestions and constantly improve the quality of our Automotive Universal Joint Bearing, 30211-RS-3B Bearing, UCP207 Pillow Block Bearing. Our company is committed to continuous innovation of products and improvement of product performance from the beginning of entrepreneurship. We take high-quality product quality as the foundation of enterprise survival and development. We take marketing and service as the leading factor, through product trade to drive smart services, and smart services to reverse the trade model to achieve a two-way win-win situation. Therefore, the company constantly improves surpasses itself, achieves good results in the continuous struggle in the industry and makes its modest contribution to the market to create a better tomorrow. We hold strengthening and perfecting our items and repair.

Description-Dental Bearing S418MCKHH

GJP Bar Code Number: 6935329838093

GJP Dental Bearing S418MCKHH is mainly for high-speed hand piece, which could rotate at the speed of 400,000RPM, replaceable with the dental hand pieces produced in Japan, Germany and UK etc., at the normal working condition, the clinical service life is no less than six months, the high-speed dental drill ball bearing is a kind of precision miniature bearing, thus the careful installation and use, meticulous operation and elaborate maintenance are requested, otherwise it’s performance and working life will be affected directly. For instance, the damage of ball and groove by the impulsive load during the bearing assembly or improper lubrication, regard to the bearing installation, the interference fit of the shaft, and bearing bore is preferred to be within 0-2um. The roundness deviation of the shaft shall be less than 2um. when the shaft is pressed into the bearing bore, the acting force shall be directly on the end face of inner ring. The force shall not pass through the ring raceway groove or the steel ball, otherwise the bearing precision will be damaged.


After a pair of bearings are installed on the turbine, the bearing and the turbine shall be cleaned, then drop the lubricating oil. At the moment, they can be mounted in the head (Never use the alcohol or acetone as the cleaning liquid). In order to ensure the high speed, after mounting in the head, apply some axial preload on the pair of bearings. The load is 1-2N After the finish of installation, the shaft shall not have the axial moving. The rotation of the bearing shall be flexible. If the axial preload is too tight or loose, replace the washer or add or remove the gasket, so as to ensure the correct preload, in case of the revolution skidding or top-like rotation of steel ball at the high speed.The maintenance of turbine head is very important for the normal working and long service life of the bearing. In the clinical use in the hospital, besides the daily disinfection.


The daily cleaning and maintenance shall be done to the turbine head. Before the use, demount it and apply the cleaning liquid,Then mount it, and fix the drill bit by hand instead of rotating. Ventilate the compressed air for some seconds. Use it after the bearing is cleaned and lubricated by the compressed air.


Dental Bearing


GJP Code

Dimensions

Speed Limited

Air pressure

Noise

d

D

B

rpm

MPa

dB

S418MCKHH

3.175

6.35

2.78

350000 to 400000

0.2 to 0.25

not more than 70dB


Technical Data for GJP S418MCKHH

Dental Bearing No.: S418MCKHH

Material For Bearing: 100% Chrome Steel material(Gcr15 material)

Grade For Steel Ball: Si3N4 Ceramic Ball.

Cage Material: Nylon cage

Sealing Type: One side with NBR rubber seal, another side with Z shield.

Grease: High Speed Grease.

Bearing Race and Steel Ball Hardness: HRC59 to HRC60

Bearing Precision: Abec-7

Quality Control: Under ISO: 9001: 2008 Certificate

Package: GJP plastic Tube packing(50pcs/tube)+ GJP color box+1*1 GJP outer carton



We are committed to providing high quality High Quality Customizable Fishing Gears Ball Bearing 639 Zz/2RS, excellent services, competitive prices and prompt delivery, we are looking forward to cooperating with clients all around the world. We do our best to follow customer needs, continue to carry out product innovation and service improvement, and win the trust of our customers with our multi-variety operating characteristics and the principle of small profits but quick turnover. We hope that through our efforts and changes, we can constantly meet the personalized needs of customers and become a good partner worthy of your trust.
Hot Tags: handpiece angular contact ceramic dental tool instruments precision bearings s418mckhh, China, manufacturers, suppliers, factory, custom, Center Support Bearing, Bearing For Belt Cutting Machine, UCP205-16, UCP213-41 Pillow Block Bearing, AMI UCP210-32, HCFT205-16 Flange Bearing

Inquiry

You Might Also Like