UCP319 Bore 95mm, UCP319-60 Bore 3-3/4

UCP319 Bore 95mm, UCP319-60 Bore 3-3/4" Inch Pillow Block Bearing

GJP 2 7/16" Pillow Block Bearing UCP212-39 with 2 3/4" Base to Center, Which has grease fitting and Cap on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used.

Product Details

With our leading technology as well as our spirit of innovation, mutual cooperation, benefits and development, we will build a prosperous future together with your esteemed company for Dental Bearing, Plastic Mounted Center Support Bearing, ft205 bearing. The company has established an informatization research and development system oriented by market demand. We will integrate into the international economic competition with a new attitude and high-spirited pace, and closely follow the footsteps of the world. After long-term practical experience and continuous improvement and optimization of structural design, our products achieve excellent performance in terms of efficiency, performance and safety.

Description-2 7/16”Bore Pillow Block Bearing Unit UCP212-39

GJP Bar Code Number: 6935329802346

GJP 2 7/16" Pillow Block Bearing UCP212-39 with 2 3/4" Base to Center, Which has grease fitting and Cap on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used.


Interchange

GJP: UCP212-39

AMI: UCP212-39

IPTCI: UCP212-39

NSK: UCP212-39

Peer: FHSP212-39G

Fafnir: RASC-2 7/16"

Fafnir: YAS-2 7/16"

RHP: NP-2 7/16"

SKF: SY 2 7/16" TF


UCP212-39


Basic Dimensions

Bore Size

Center Shaft to Base Size

Housing Length

Center Bolt to Bolt Size

Housing Width

Housing Bolt Length

Housing Bolt Width

Housing Height

Bolt Size

2 7/16"

69.8MM

241MM

187MM

70MM

25MM

20MM

138MM

5/8


Technical Data for GJP UCP212-39

Housing No.: P212

Bearing Insert No.: UC212-39

Material For Bearing Insert: 100% Chrome Steel Gcr15(AISI 52100)

Grade For Steel Ball: G10 Grade Chrome Steel Ball.

Materia of Bearing Cage: #10 Steel

Stopping Pin Material on OD of OR: Chrome Steel Gcr15

Sealing Type: F Seal, L3 Seal And Normal NBR Seal are available for customers’selection.

Set Screw Material: 35CrMo

Grease: 20% to 50% Mobil Grease

Set Screw Surrounding Hardness: HRC49 to HRC 50

Bearing Race and Steel Ball Hardness: HRC59 to HRC62

Bearing Housing Material: HT200 Grey Cast Iron

Housing Color: Green, Blue, Grey, Black Color available.

Whole Unit Assembly Type: J7 Tight Fitting

Housing Weight: 2.8KGS

Quality Control: Under ISO: 9001: 2008 Certificate

Package: 1*1 Single GJP poly bag+1*1 Single GJP color box+1*1 GJP outer carton



GJP offer Pre-sale services:

1. Providing professional technical support.

2. Send the product catalog and instruction manual, free samples would be sent if required.

3. If you have any question,PLS contact us online or send us email, we promise we will give you a reply at the first time!

4. Personal call or visit and audit factory are warmly welcome.


FAQ

For the Cast Iron Bearing Unit, if we have the special requirements, and you need to open the mold, after we pay to open the mold, our company wanna to get this mold together with our shipment when the cargo is ready, is it acceptable for GJP?

Yes, of course, if your company pay the mold fee to have a new mold, you have the right to deal this mold, whether you wanna to put it in our factory, or you wanna to get it back to your factory, it depends on you, and normally our customers who open the new mold, they just keep the mold in our places, and we could use it whenever there is a new order in the future from your company, of course, we could pay you some if we think that this mold is useable a lot in our factory.


To meet the challenge, we are breaking new ground with our UCP319 Bore 95mm, UCP319-60 Bore 3-3/4" Inch Pillow Block Bearing to enable it to have exquisite design, simple operation and reasonable prices. We will further improve the technical system, strengthen product sales, and after-sales service. Excellent talents play their strengths in our company. Through continuous exploration and innovation, we can create high-quality products in the industry with professional attitude and achieve industry leadership with team wisdom.
Hot Tags: 2 7/16'' pillow block bearing ucp212-39 with 2 3/4'' base to center, China, manufacturers, suppliers, factory, custom, Tapered Roller Bearing With Seals, P205 Bearing, 2 Bolt Flange Bearing, UCP212-38 Pillow Block Bearing, UCP211-33 Bearing, UCP202

Inquiry

You Might Also Like